- Not easily broken and transparent flow set
Neo Flow is made of PETG, not glass, and is also stronger than acrylic.
Unlike colored plastics or stainless materials, it has excellent transparency. - Elasticity
Unlike glass, colored plastic, and stainless steel products, Neo Flow has superior elasticity than acrylic. - Compact design
Neo Flow is more compact design using the latest manufacturing method than other products. - Easy cleaning
Unlike stainless and glass products, cleaning is easier because the inlet and outlet parts are separated from the pipe. - Easy pipe cutting
Also, unlike stainless steel and glass products, it is easily cut with a small saw as well as pipe scissors. In other words, consumers can optimally adjust the length to fit the size of their tank. - Change of water flow direction
Since the parts of the outlet are rotated 360 degrees, it is free to change the direction of the water flow unlike glass products. - The radius of curvature is small.
Compared to other products, the radius of curvature is small, so it is installed more closely to the glass.
* Product specification
M: pipe diameter 13 mm / L: pipe diameter 17 mm
NEO SKIMMER
NEO SKIMMER OFFERS THE BEST OIL FILM REMOVAL CAPABILITY WITH MINIMAL DESIGN.
Principle of oil film removal
The oil film that has passed through the Neo Skimmer is crushed very finely and loses its flotation.
Eventually, it enters the inlet of various filters and is biologically decomposed.
IT DOESN'T TAKE UP SPACE.
The largest product, L size, is only 4 cm wide and 4.5 cm high.
IT CONNECTS TO NOT INLET, BUT THE OUTLET.
IT DON'T NEED ELECTRICITY.
Based on Bernoulli's principle, it uses the correlation between flow velocity and pressure.
IT DOESN'T TRAP CREATURES
Since it is located at the outlet, any creature that enters the skimmer is immediately discharged.
IT'S EASY TO ADJUST
The ability to remove the film can be adjusted by moving the part up and down and rotating the left and right sides.
AERATION IS POSSIBLE.
Aeration is possible when setting high level
How to use
DO NOT SET THE CUTTING SURFACE IN THE OPPOSITE DIRECTION OF THE WATER EXIT. INSERT THE VERTICAL PART DEEPLY AND ADJUST THE OIL FILM REMOVAL ABILITY BY TURNING THE VERTICAL PART LEFT AND RIGHT.
IF THE SKIMMER IS EXPOSED OUTSIDE THE WATER BY KEEPING THE WATER LEVEL LOW, CUT THE LONG SIDE OF THE PIPE AND CONNECT IT WITH THE SKIMMER.
NEO RELIEVER
WITH ITS MINIMALIST DESIGN, NEO RELIEVERS CAN FREELY ADJUST THE FLOW VELOCITY AND DIRECTION OF THE SHOE.
MINIMAL SIZE
Neo reliever has a diameter of 40mm and a thickness of 22mm(M) and 26mm(L).
PERFECT FLOW RATE REDUCTION
Even when used without a wing, it lowers the flow velocity, but when equipped with a wing it is completely reduced.
FREE FLOW DIRECTION CHANGE
You can freely change the direction of the water flow by using only one of the wings or by rotating the product.
WATER FLOW CAN BE CUSTOMIZED
The water flow varies depending on the number of wings installed or the degree of insertion.
If only one wing is mounted, the water flow is formed in one direction.
COMPATIBLE WITH NEO SKIMMER
Neo skimmer and reliever are connected and can be used at the same time.